Cement Plant Use OEM Rubber Scraper Rubber Pad For Bucket Elevator Conveyor System

The conveyor rubber scraper, also known as a conveyor belt cleaner or belt scraper blade, is an essential wear-resistant accessory installed at the head, tail or return side of belt conveyors. Its core function is to scrape off sticky, wet, granular or bulk material residues adhered to the surface of conveyor belts, preventing material carryback.

1. Primary Scraper (Head Scraper) Mounted directly under the head pulley of the conveyor. It removes most bulk residual materials on the carrying side of the belt with strong scraping force, undertaking the main cleaning task.
2. Installed behind the primary scraper for secondary cleaning, clearing fine sticky dust and tiny residual particles that the primary scraper cannot remove completely.

1. Eliminate material carryback, reduce material waste and ground accumulation around conveyors.
2. Protect rollers, idlers and conveyor frame from abrasion and blockage caused by residual materials.
3. Prevent belt deviation, reduce abnormal wear and tear of the conveyor belt, extending belt service life.
4. Soft rubber material avoids scratching, cutting or damaging the conveyor belt surface compared with metal scrapers.
5. Reduce manual cleaning frequency, lower labor cost and improve overall conveying system operating efficiency.

Widely applied in mines, thermal power plants, cement plants, sand and gravel yards, grain depots, chemical factories, port bulk cargo transportation, steel plants and other bulk material conveying systems.